Insulating the Shop…I Mean, the Garage…(with bonus ice storm pics)

We’re doing it! We’re really doing it!! Besides being darn close to breaking the record for wettest year ever, Mother Nature pretty much skipped Fall and went right to Winter. It’s been way too cold to do much work in the shop (we’ll just go with “shop” even though it’s really a garage, okay?). After much research, and thanks to Tim’s support, we are hoping that adding insulation will provide more uses/opportunities for the shop space.

In all honesty, the biggest hurdle for this whole project is the overwhelming amount of crap we have stored out there. It’s just been the repository for the “I don’t know where else to put this” stuff. It really is time to sort through it all anyway, but wowza, it’s a big job. There’s not just stuff on the ground around the perimeter, but on shelves on the walls, on shelving units, and on random nails everywhere.

We already replaced the side door (in picture above) a few weeks ago, because that had been on the list even before the insulation decision. At this point, we’re not investing in a new garage door, so we’ll add insulation to the existing door. You can also see above, that there is already drywall on the ceiling. On the plus side, less drywall to worry about, on the minus side, we need to crawl up above it and add insulation from the top. It’s not a big space to move around in.

It took a few hours, but we cleared off about 15 feet of wall, got a few rolls of insulation and got started.

Once again, I was ridiculously excited that I was doing this myself. Tim helped later after he got a few more things on his list done, but I jumped right in solo. It took way less time to put the insulation up than it did to clear the wall space.

As soon as weather and time permit, we’ll get wall board for this section and put up shelves. The plan is to organize as we move stuff over and then work on opening up the next section. We have another third of this wall, the back wall, around the garage door, and the ceiling to go. Tim uses the garage space for a lot of projects as well. I really think we’ll both benefit from this undertaking, with the added bonus of cleaning out more stuff we forgot we had and don’t need.

I have a random add on to this post. Last Saturday, we had a freezing rain event and I was able to get a few pretty cool shots with the fancy camera.

Very glad we were home and indoors for this weather. It’s super pretty to look at…from inside the house.

Smaller Pieces Out of Wood

As promised, late, but getting done, I wanted to share pictures of some of the smaller pieces I’ve been working on. I had a bunch of leftover 1x4s from the bed, and some leftover 1×12 from the nightstands since I didn’t use it for the bottom shelves. I used it for the following, using inspiration from some of the AMAZING woodworkers I follow online and on Instagram.

Completely unrelated is that my phone died. I lost some pictures, unfortunately, and I’m not quite over the learning hump with the new phone. I’m figuring out that some of the pictures I took with the new phone are on a super small setting and are blurring a little when I make them larger. Sorry, it’s not your eyes, it’s the pictures.

Here are pieces ready to be Weatherwashed for two trays, a centerpiece box, a wine tote and a beer tote.

Below is one of the many display ideas I tried in a tray photo shoot.

Here is the centerpiece box. I have battery operated pillar candles that I can picture in there with seasonal additions.

I also built a Shanty-2-Chic inspired wine rack. I used the Weatherwash Pined and Clear Maintenance Oil (I used it on the box above and the Rusted stain on the tray). I woodburned two designs, three of one and two of the the other.

Lots of pocket hole action using the Kreg jig.

Final product (with a very rare blue sky background)!

And something really, really exciting is my early Hanukkah, Christmas, Anniversary present. After a TON of research and review reading, I now own pretty RIDGID Power Tools! Still a few I want to add to the collection, but woooooooot!!!

 

 

Nightstands So Far

Hi all. Been keeping super busy here. I’m building nightstands, painting the basement, trying to be a little creative on my own by using scrap wood to make decorative, rustic trays and centerpiece boxes. I have been so inspired by the makers/woodworkers I follow on Instagram. Although I have a mile long list of things I want to make, I’m feeling pretty good about the productivity level, and I’m never without something to work on.

I have one nightstand assembled, thanks to help from Tim. I think Fargo approves.

We used the same tongue and groove for the top that we used for the headboard. We thought that would tie it all together nicely.

One of the most challenging parts for me, was to cut the bottom shelf out around the legs. I didn’t think the original design for the shelf really fit the look I am going for, so I used upside down, wider tongue and groove. Out came the jigsaw, and…

Not too shabby, eh? SQUEEEEEE!!!!!

The other challenging part was building that drawer. It was a first drawer build for Tim too, but we figured it out together. I know it’s repetitive, but I was ridiculously excited when the drawer fit well.

I’m working on the second nightstand now. I’ve done all of the assembly work so far on the second one SOLO! I’m really proud of this, it’s a huge step.  I employed the use of clamps along the way.

Lots of pocket holes in this build, so I’m loving the Kreg Jig! You can see the Weatherwash in the background, which I also love. This morning I used PINED on the first nightstand in order to match the bed. It’s way too windy to move the miter saw into the driveway and finish building the second one, so I figured I’d stain the first. I’ll have an updated post with the rest of the nightstand pictures soon. I’ll also have a post with the assorted other items I’ve been putting together.

I’ll leave you with Fargo The Terrible, keeping me company while I build. Good thing I make sure he has a comfy place to rest.