Although this was the third nightstand I built, it was the second type of nightstand. This Reclaimed Wood Look Bedside Table was another Ana White plan. It had a few firsts for me, including making side panels and installing drawer slides. I learned a lot while building this, though I learn a lot with every build.
Here is a view of the side panel, boards are attached to each other with pocket hole screws. I opted for one coat of stain prior to assembly because it is hard to get all the nooks and crannies once it is together.
Here you can see the pocket holes on the inside. Fargo is inspecting the assembly of the two sides. I was very proud and excited that it was all square!
Also square, were my drawer boxes.
First time installing drawer slides.
I had seen several people use a deck of cards to center drawer faces. Unfortunately, these cards were so slippery, that it made the process extra challenging. Centering drawer faces well is something I think I’ll be working on for a while.
For the top, I laid all the boards out and lined them up, then clamped one board in place to use as a guide for the rest.
Added the knobs and here it is!!
I again used Weatherwash Rusted Stain and Satin Varnish, as those are what I used on the headboard. I ordered the drawer slides from Rocklers, and the knobs are from Home Depot.
My next few posts will focus on the table I built for The Builders Challenge, which took place on Instagram. My current build is a dresser to match the headboard and nightstand. Stay tuned!