Fly Fishing Rod Tube Holder (Hopefully): Part I

Back in November, I decided that a great woodworking Hanukkah/Christmas gift for Tim, would be a fishing rod tube holder. I looked all over the internet for ideas and “how to” instructions, without much luck. I finally found someone’s blog post from 2011 that included an option I liked and some basic instructions. Here is a picture:

I bought the 2x4s, I had the 2x6s, and I had some 1×12 pieces someone gave me that I thought would work well for the bottom. In order to make this the most useful for Tim, I did ruin the surprise and talk it over with him. We decided that it would only need two rows vs three. That was the first of what would be multiple deviations from the original plan.

This build required 3″ holes, quite a few of them. I researched using a hole saw bit vs a forstner bit and the general consensus seemed to be hole saw. Besides the holes in the 2x4s, I planned to drill holes in one sheet of 1×12, then glue/nail it to a solid sheet for a sturdy bottom. I bought a hole saw bit at Ace, attached it to the drill press, and decided to try it out.

Let’s just say, using a hole saw bit is not my favorite. We have an ancient, hand-me-down drill press which gets the job done, but is not user friendly. I had used it many times with a forstner bit, but was definitely unprepared for how the hole saw bit would grab and turn the piece of wood when it touched. (I had to copy this picture from my Instagram because I lost the original when my phone imploded). After drilling the first hole, I opted to add a clamp and recruit Tim to help. It was a thick piece of wood, and none of us were happy…the drill press, the bit, me. You can see in the picture that the wood just stuck to the teeth, and it actually burned the wood in spots.

One of our good friends/neighbors heard what I was working on and thought it was a neat idea and something he might want to build as well. In talking with him and with Tim, the next alteration would be replacing the 2×4 legs with 2x2s. A few days later, our friend brought a bunch of boards from a garage clean out, all different types of wood, including one we believe to be cherry.

The next alteration in the build was to use the “cherry” (using quotes because I’m just not positive that’s what it is) board and have one flat row of four and four, to mimic the bottom. In addition, our friend said I should really have taller holes on the bottom for the tubes to sit in so that they wouldn’t slip out sideways. This led to the idea of drilling holes in another cherry piece in order to layer it over the pine board on the bottom.

After getting this board finished, the project sat for quite a while, repeatedly getting pushed to the bottom of the list. Flash forward to this past weekend, and a rare sunny day. Tim and I rolled the drill press out, and after a little trial and error, and some oil on the drill press, we were able to get a decent rhythm going.

We still had some tear out, but once the drill press lever moved more smoothly, it was less. Also, the “cherry” boards, though harder wood, aren’t as thick as the pine, which helped.

As Tim got a good look at the “cherry” wood, which is really pretty, he decided on the final alteration to this build. He wants two flat pieces of board on either side, instead of the 2x4s or the 2x2s. The board is a little wonky in spots ( you can see it a bit in the picture below), and it is on the dry side, so we’ll see how this all goes. Note the blue sky in this picture…the RARE blue sky…and Tim, prepping for more Winter weather.

Hey, if this actually works out, maybe I’ll find someone who can help me post plans for it that I can share.

Sofa/Console Table: Part II

After a few days of Spring, the Winter weather has returned to Central PA. We made the most of the post-polar vortex reprieve and got much of the drywall up in the garage.I loved being able to get outside early enough that we could watch the tail end of the sunrise.

The whole back wall is now done and only a third of a sheet is left to do by the garage door.

The console/sofa table has been an experience. It will apparently take three parts to really share the experience of making it. Part II is focused on how much harder it was to get the pieces of wood lined up in the herringbone pattern than I anticipated. First, Fargo and I got the round 1 sanding done, and I didn’t even have a coat on!

Once the sanding was completed, I had some interesting hours. It was all fun and games when I was just laying the pieces of wood out to make sure I cut enough. Actually lining them up so that the centers didn’t travel off to one side of the plywood or the other was a different story.

I used clamps on two pieces in the middle. I then lined the rest of the boards in place above and below. It was so frustrating that I had to walk away for a bit and come back to it. It would definitely have been easier if I had just cut the angle on the center edges and lined them up on the middle line. This way, not only did I need to line it up even from both edges, but the tilt had to be correct as well.

Once I FINALLY got to the point where it was as centered as possible, I tightly clamped the two middle pieces in order to permanently affix them in place and use them as a guide. I actually flipped the board over, nailed those two pieces from the bottom, crossed my fingers and began the glue-up process.

As an extra measure to secure the herringbone pieces to the plywood, I nailed all of them to the board from the back. I honestly have no idea if that was a good idea, or not, but I was just too nervous they would fall off.

Now that all but the smallest pieces are attached, I’m hoping to use the circular saw today (once temps get into the 20s) to trim the herringbone pieces to the size of the plywood. I’ll then use the scraps for the remaining open spots. Hoping the circular saw and I get along well.

In between, I’m still doing yoga (and Fargo is still fighting me for the mat), and I’m still stopping to take some pictures (mostly from indoors). Had a pileated woodpecker stop by the back yard.

I’m ready to get the final sanding on the table done and start staining it. I submitted my table project to the Weatherwash Brand Ambassador program and it was accepted, which I’m pretty excited about. They sent me the Oaked Stain, White Maintenance Oil and Satin Varnish for free to use on the table in exchange for some social media postings and pictures to help with their company promotion. Given that I started using their products for the bed and nightstands and how much I love the results, it’s super cool to be working with them on the table.

Okay, wish me luck!

Sofa/Console Table: Part I

As I type, the crazy winter winds are blowing and pairing up with the crazy polar vortex temperatures. I’m very grateful to be indoors right now, working on a blog post (assuming we don’t lose power). I’m also working on a blog post because the weather conditions are preventing me from working on my current project…a sofa/console table.

I’m still using construction grade lumber “soft” woods, with edges in the slightly rounded condition in which they come. I do this partly because I can with these types of builds, but mostly because I like the rustic look it provides. As my skills improve, I plan to try working with more hard wood varieties, especially if I can find local sources for reclaimed lumber.

The table I’m building is mostly based off of this Shanty-2-Chic plan. The place I’m diverging from the plan is the table top. I was able to get the pieces for the main structure cut and first round sanded last week. Here is what it looks like so far.

Fargo, as always, watching, and inspecting the work.

After watching a bunch of tutorial videos, including this one from Eternal Harvest Decor, I decided I wanted to attempt a herringbone table top. As an aside, I follow Brandi, of Eternal Harvest Decor, on Instagram and she is a talented woodworker and a hoot. Luckily, I was able to use the driveway workshop on Monday and started cutting the 1x3s for the top.

It took me a few minutes to really get the hang of how the pieces of wood were going to be laid out. I’m really excited now that I have this started (imagine the 13.5″ x 51″ plywood underneath is cut out). I had to stop due to frozen fingers and toes, but you can get the idea.

I’m really proud of myself because I used the circular saw, by myself, and cut the plywood. I even did a freaking good job! I know it’s not as powerful as the corded circular saw we have, but this Ridgid cordless saw is so much quieter (i.e. less scary) and it cut super smoothly.

I’m planning to try a different Weatherwash aging stain on the table, it’s called Oaked. I’ve done some test pieces and I like it with the Clear Oil I’ve used on all of the other builds, and with the White Maintenance Oil which is also new to me.

Okay, now to the non-woodworking part of the post. I’ve stuck with the 30 Day Dedicate Yoga with Adriene program, completing Day 29 today. I really enjoy the 20 minutes (=/-) each day, as does Fargo, who tries to steal my mat. How am I supposed to argue with that face?!?

I do chuckle some mornings when Adriene is wearing a tank top, and I am trying to decide what is the perfect number of layers to have on.

In addition, we’ve continued to have some lovely Winter scenes, as long as one is indoors, that I’ve tried to capture.

I’m hoping to finish building the table this weekend, as we’re supposed to have more “normal” Winter conditions by then. I will jump for joy if it turns out like I have it pictured in my head, or at least reasonably close. Also, we were able to squeeze a trip for drywall in between snow showers on Sunday, so putting that up is on the weekend agenda. Then, I can’t wait to figure out what will be next!

Programming note: My wonderful cousin made some adjustments to try and prevent pictures from appearing sideways on phones/tablets. They appear correct on the computer, which confuses things. I don’t seem to be able to go back and fix pictures in the old posts, but as I’m about to hit “publish” I’m hopeful everything will be facing the right way.

Winter (2019) Scenes

The weather here is really putting a damper on projects I want to work on. Between the rain, ice, snow, wind and blasts of arctic temperatures, getting any driveway workshop time is tough.

Believe me, even if it’s 20 degrees out, if it’s dry and calm, I’m out there freezing my fingers and toes off.

The garage is totally torn apart with the insulation/drywall installation, so no room to do any work in there. The rest of the drywall won’t happen until we have a dry truck bed to buy more. On the up side, insulation is 99% completed and it already feels way more tolerable, especially without the drafts.

I’m pretty pleased that I got it done, and even though it’s far from perfect, I did most of it myself.

Besides that, I’ve taken some pictures on the fancy camera that I’ll share because they show the beauty of this weather.

If you are looking at this post on a phone or tablet, you may still be seeing rotated pictures. They are all showing up correct on the computer. Bizarro.