Sofa/Console Table: Part III

It’s finished!!!!! I built a sofa table and it’s finished and I’m ridiculously excited about it! Tim provided support and some guidance and suggestions, but this baby was 95% me. I’ll start with a finished picture because I wouldn’t want to make you wait til the end of the post (told you I’m excited) and then back-up for some in-progress pictures.

I’m not great with decorating, but here is my first go at it. May try a few different versions of table decorations over the next few weeks.

Okay, in the last post, I had made it as far as the assembling the table top. Took advantage of a nice day between polar vortex and snow/ice storm to get moving on next steps. Trimming it down to size was interesting and super stressful. I started with the table top upside down, so I could follow the plywood, but the circular saw blade was rubbing on the plywood and the track was catching on the nail heads. This is one of the times Tim had to really talk it through to help me figure it out. THANK YOU, TIM!!

Flipped it over, marked the plywood edges on the sides of the herringbone pieces and lined up the track.

Once I was finished with the circular saw, which I’m slowly getting better at using, I cut/glued the remaining small pieces. Before I added the frame around the outside of the table top, and attached it to the base, I sanded it again and stained it first. I used the Oaked Stain from Weatherwash, and had planned to use the White Maintenance Oil, but loved the stain color so much I opted to go with the clear oil. Due to the crazy weather, and the state of the garage, I moved everything to the basement where the lighting is not optimal.

So pretty! I added the Clear Maintenance Oil, which deepened the colors. Oiled sections on the right in the picture below.

I will say, once again, that I’m not sure I understand assembly before staining. I realize it’s nice to know if it’s going to look good/correct once it’s all together, but it sure makes finishing a supreme pain. I used a teeny tiny brush to reach in between the bottom shelf slats. Pretty sure I’m going to go back to finishing all of the pieces first for the next project, even if it’s wrong.

The Shanty-2-Chic plans I followed for the base called for wheels on the bottom. Tim and I weren’t interested in wheels, so we did some internet searching and came up with an alternative. We love how these look as part of the finished piece (thank goodness).


Here is a picture from the other direction with a good view of the feet.

Well, that was probably more than you wanted to know about my first table build. Maybe it should have been a 4 part post. I learned so darn much through this process and I can’t wait to try it all out again, and to use what I’ve learned on new projects. Thanks for following along on this journey with me!

Oh, and something super fun happened when I posted on Instagram yesterday! I tagged Brandi at Eternal Harvest Decor in my comments to thank her for inspiring me to try a herringbone table top and for her youtube instructional video and she posted my table in her stories!

This is illustrative of the support I’ve seen in the Instagram woodworking community. On top of this, the amazing comments I’ve received from you all on Instagram and Facebook make me feel grateful and I appreciate it.

Sofa/Console Table: Part II

After a few days of Spring, the Winter weather has returned to Central PA. We made the most of the post-polar vortex reprieve and got much of the drywall up in the garage.I loved being able to get outside early enough that we could watch the tail end of the sunrise.

The whole back wall is now done and only a third of a sheet is left to do by the garage door.

The console/sofa table has been an experience. It will apparently take three parts to really share the experience of making it. Part II is focused on how much harder it was to get the pieces of wood lined up in the herringbone pattern than I anticipated. First, Fargo and I got the round 1 sanding done, and I didn’t even have a coat on!

Once the sanding was completed, I had some interesting hours. It was all fun and games when I was just laying the pieces of wood out to make sure I cut enough. Actually lining them up so that the centers didn’t travel off to one side of the plywood or the other was a different story.

I used clamps on two pieces in the middle. I then lined the rest of the boards in place above and below. It was so frustrating that I had to walk away for a bit and come back to it. It would definitely have been easier if I had just cut the angle on the center edges and lined them up on the middle line. This way, not only did I need to line it up even from both edges, but the tilt had to be correct as well.

Once I FINALLY got to the point where it was as centered as possible, I tightly clamped the two middle pieces in order to permanently affix them in place and use them as a guide. I actually flipped the board over, nailed those two pieces from the bottom, crossed my fingers and began the glue-up process.

As an extra measure to secure the herringbone pieces to the plywood, I nailed all of them to the board from the back. I honestly have no idea if that was a good idea, or not, but I was just too nervous they would fall off.

Now that all but the smallest pieces are attached, I’m hoping to use the circular saw today (once temps get into the 20s) to trim the herringbone pieces to the size of the plywood. I’ll then use the scraps for the remaining open spots. Hoping the circular saw and I get along well.

In between, I’m still doing yoga (and Fargo is still fighting me for the mat), and I’m still stopping to take some pictures (mostly from indoors). Had a pileated woodpecker stop by the back yard.

I’m ready to get the final sanding on the table done and start staining it. I submitted my table project to the Weatherwash Brand Ambassador program and it was accepted, which I’m pretty excited about. They sent me the Oaked Stain, White Maintenance Oil and Satin Varnish for free to use on the table in exchange for some social media postings and pictures to help with their company promotion. Given that I started using their products for the bed and nightstands and how much I love the results, it’s super cool to be working with them on the table.

Okay, wish me luck!